Pdf MITSUBISHI PAJERO vehicle alarm FITTING instructions Place compact alarms and sirens in the engine compartment, on the support of shock absorbers to the passenger side. Pass the cables through the logjam original nucleus located in the bulkhead that separates the engine compartment and the passenger compartment on the passenger side.
LOCATION OF CENTRAL UNIT
Modular systems and modules must be placed on the left side of the dash, drivers side.
POWER SUPPLY
+ 30: connect to 4 mm 2 red thread is a multi-user, connector in the fuse box.
-31: connect with a cable terminal directly to the car body. IGNITION CABLES
+ 15/54: connect the white/black wire with silver reference in the wiring on the left along the steering column.
DIRECTION INDICATORS
Connect the green/red wire to the location 9
Yellow-green wire with reference at the silver position Nr. 7 located in
15, white connector at the bottom of the fuse box under the dash on the drivers side.
ELECTRIC WINDOWS
Bus controls
Signals to make the connection of the module are not available.
CENTRAL DOOR LOCKING
Negative control signal
Connect the light wire Green/Black (block) and the brown/black wire (Unlock) located in 32 white connector on the left side of the fuse box under the dash on the drivers side. For the series of antithefts bridge reference no. 73 for the diagram and 3100 Series antithefts reference nr. 73. diagram
No comments: