This is the information in the installation instructions and the proper tools, equipment is accurate and safely add equipment to your vehicle with an experienced technician training is intended for use only by the. 1. make sure the radio code for a preset button, and note the frequency of the anti-theft.
2. disconnect the negative cable from the battery. Fog light installation
3. open the hood. Loosen the battery bracket nuts. (Seven clips, and one of the bolts) then remove the radiator cover.
4. four clips, 4 bolt and front bumper, remove the two tapping screws. Remove the front bumper.
5 fog light around the bumper cover. Use the masking tape.
6 fog lights to cut out slowly and carefully. Use a utility knife to make your line should cut a straight line. ", and the bumpers do not compromise. On the edge of the fog light Grill open file, which removes the burrs.
7. fog light trim the edges of the rubber connections open.
8. left fog light, fog light, left, and one coordinator, screw and washer screw 4 x 8 mm one.
No comments: