Conversion guide user movies A plug-in hybrid electric vehicle (PHEV) Conversion Kit is a set of rechargeable battery car battery hybrid is completing. It provides electricity to the battery, charged from the electrical outlet wall finishes, which provides 20-40 miles of driving electrically assisted payment sufficient for most normal daily commutes. It is safe, reliable, environmentally friendly and uses.
Attention
1. Please read the instructions before installing.
2. never connect wires correctly.
3. new batteries should be charged to full and balanced re-before use.
4. Please check the voltage of the batteries and the first times ?????? car.
5. the charge to extend battery life, equipment must be it, using a home power charger is provided, then the 110VAC full whenever you need fully balanced after the load cells.
6. automatic switch in the case is set to be shut down automatically if the current exceeds the alarm
(100 a). In this case you will need to switch to disable separator manually and this again before use.
7. Please switch the equipment immediately if a defect is not while driving.
8. Please do not break down the components if the equipment working normally
What is included in this product
? 16/32 cells for 2KWH/lasting lithium-ion batteries, 4KWH
? Battery integration — one for all 8 cells, and battery voltage monitoring and balancing to avoid over or under the charges to individual cells. That extend battery life by a factor of 3.
? High car charger 48V/15A
? DC/DC controller converter 3000W
? Fire extinguisher protection when the temperature is above 105 ? — first of all, please open the lid and inserter blue to give it work insulative.
DC disconnect switch automatically — ? high voltage equipment operation in case of high current fault.
? Simple use case, easily installed on the system.
No comments: