E49 Opel Sintra English Read

Traffic lights left side parking lights installation instructions the tow hitch is designed for Assembly in the following cars: OPEL SINTRA from 1996 to 1999 and CHEVROLET Trans sport, produced since 1997 to 2006 year, catalog no. E49 and ready to tow a trailer with a maximum total weight of 2000 and vertical load 75 kg. From producer thank you for purchasing our product. In many testing confirmed their reliability. Reliable towing hitch also depends on correct Assembly and operation. For the reasons that we ask

carefully read this statement and apply for the ToolTip. Towing hitch must be installed in a car manufacturer are paragraphs. 1 Assembly instruction. Take out the spare tire. Remove the two bolts of towing eyes: one from the bottom and one on the left side. 2. correction of low-angle bar (POS. 5) on the right side of the chassis through the hole (pos. A) using Bolt M10 x 35 mm (POS. 8). For models without level control: correcting low left corner bar (POS. 5) on the left side of the chassis through the hole (pos. A) using Bolt M10 x 35 mm (POS. 8). For models with level adjustment: remove bolt X, shown in Figure 2, position angle bar (POS. 5) between simply removed the plate and chassis. Fix poorly using Bolt M10 x 35 mm. For the Chevrolet Trans sport: Underneath the bumper cut out sections in Central a snippet: width 50 mm and a depth of 40 mm. Cut piece bumper reinforcements in accordance with Figure 2. 3. Disassemble the original towing eye. Place the PIN for rear exhaust through the hole in the towing brackets ø19mm hitch. Connect the towing hitch with towing eye on the car. 3. set the angle bars, put the main bar.