This handout is provided to guide you through the steps necessary to upgrade your vehicle with one of our performance chips. Also be aware that APR is only a phone call away should you every have any questions or concerns pertaining to any APR products.
Step 1: Park Car.
Insure car is off and key is out of ignition. Engage the parking brake. (Optional): Remove Battery Cable. Caution! Before disconnecting the battery, determine the correct coding for the anti-theft radio.
Step 2: Remove Windshield Wipers.
Remove Windshield Wipers to ease removal and installation of ECM.
Use a flat head screwdriver to remove the plastic cover from the wiper arm. Remove the wiper arms by unbolting the 13mm nut securing the wiper arms. After the nut is removed the wiper arm must be wiggled in order to remove the arm from the mount. Be sure to note the location of the wiper arm for re-instillation.
Repeat this procedure for both sides.
Step 3: Remove Factory Weather-Stripping.
Step 4: Raise Plastic Lid Over Pollen Filter.
Step 5: Remove Plastic Bracket, noting location of tabs
Step 6: Pull tab on wiring harness to the left, and remove left wiring harness.
No comments: