Please take a few minutes to review this manual thoroughly before you begin work: quick parts to check to make certain your kit is complete (see parts list sender in this package). If you discover damage or shortage delivery, please call our office immediately. Take a look at exactly what you are going to need in terms of tools, time and experience.
Review our limited warranty carefully.
When you unzip the kit compressor not to raise the compressor by tangential actuator Assembly black plastic. This is preset at the factory and can be modified if used as a lifting point!
Attention: Relieve fuel system pressure before servicing fuel system components in order to reduce the risk of fire and personal injury. After relieving the pressure of the system, a small amount of fuel can be released when servicing fuel lines or connections. In order to reduce the risk of personal injury, cover the fuel regulator and line fittings with a shop towel before disconnecting. This will catch any fuel that may escape. Position the towel into a container approved when the job is complete;
Only use premium 91 octane fuel, or better.
Magna charger systems were built to produce about 20 RWHP per pound of thrust at sea level. High altitudes will produce different numbers. Our Magna charger kits are designed for engines in good mechanical condition. Installation on high mileage engines damaged or is not recommended and may result in engine failure, for which we are not responsible. Magna charger is not responsible for the engine or consequential damages.
Recalibrate motor aftermarket devices that change the fuel and spark curves (including, but not limited to programmers) are not recommended and may cause engine damage or failure. Use of non-approved programming Magna charger will void all warranties. If you have any questions, call us.
After completing the installation and test the vehicle, please complete and mail the warranty card, so we can add to our files (this is important for your protection). A new fuel filter GM advised at the time of installation of the compressor.
Stock spark plugs and plug gap recommended stocks
Drive belt = Gates # K061010
Air filter = K & N # 33-2289
No comments: