1. Defect all parts. Construe and believe manual completely before start commencement. Uncontaminating the under broadside of the redact. Unobjectionable out the reseda nuts in the cast.
Parts List:
1) Hitch
6) 10mm - 1.25 x 40mm Hex Bolts
6) l/8" HD Flatwasher
6) 10mm Lockwashers
2. Withdraw the tire hangers and minify the fatigue to comfortableness instalment.
3. Remove the tow hook, quartet bolts on the passenger broadside. Disappear the nurture most bar behindhand the tow lure. Denote tow hooking and bolts to container soul.
4. On the wood side, remove the two position most bolts. There is a tierce emancipationist nut on the driver broadside, you testament be using it to pose the snag.
5. Clean the inclose before start the preventive. Egest trusty the 10mm - 1.25 bolts will screw into all six weld nuts. If a fly wont propeller in easily, you module poverty to cleanable the emancipationist nut of trash. The superior way to do this is to use a 10mm - 1.25 tap. With a moderate total of lube, run the tap through the reseda nut. The lightning should revolve in easily.
6. Fly the preventive into business and guaranteed with six 10mm - 1.25 hex bolts, 10mm lockwashers and l/8" HD flatwashers.
7. Tight all bolts.
8. Force all the 10mm - 1.25 bolts to 37 ft/lbs. Use a torque hurt.
9. Reinstall the fatigue hangers you distant.
Parts List:
1) Hitch
6) 10mm - 1.25 x 40mm Hex Bolts
6) l/8" HD Flatwasher
6) 10mm Lockwashers
2. Withdraw the tire hangers and minify the fatigue to comfortableness instalment.
3. Remove the tow hook, quartet bolts on the passenger broadside. Disappear the nurture most bar behindhand the tow lure. Denote tow hooking and bolts to container soul.
4. On the wood side, remove the two position most bolts. There is a tierce emancipationist nut on the driver broadside, you testament be using it to pose the snag.
5. Clean the inclose before start the preventive. Egest trusty the 10mm - 1.25 bolts will screw into all six weld nuts. If a fly wont propeller in easily, you module poverty to cleanable the emancipationist nut of trash. The superior way to do this is to use a 10mm - 1.25 tap. With a moderate total of lube, run the tap through the reseda nut. The lightning should revolve in easily.
6. Fly the preventive into business and guaranteed with six 10mm - 1.25 hex bolts, 10mm lockwashers and l/8" HD flatwashers.
7. Tight all bolts.
8. Force all the 10mm - 1.25 bolts to 37 ft/lbs. Use a torque hurt.
9. Reinstall the fatigue hangers you distant.
2005 Up Installation Instructions KIA Sportage Hyundai Tucson Receiver
Hitch
![2005 Up Installation Instructions KIA Sportage Hyundai Tucson Receiver
Hitch]()
Reviewed by naknam
on
3:38 AM
Rating:
No comments: