That Kit is designed to fit a 120 amp; 160 engine platform. The only difference between 120 and 160 engine will find the cable adjustment block engine block installation direction.
1. stamp mills in conjunction with plate and remove the associated hardware.
2. check your carburetor and throttle arm (black plastic molding at the top of the arm to the throttle shaft) are in good working condition.
3. metric socket head bolts provided two your engine to install interlocking leg. Vibration and harmonics to prevent loose bolts in the following thread lock of each bolt in compound: drop
4. in step 1, use the factory bolts have been removed from the engine, install the cable adjustment block.
5. use the supplied shoulder bolt. link-bridge link arm bolt Thread is a thread, use the composite locking globs.
6. throttle stop can now be linked to the bridge, the eccentric provided button head bolts until the end of the bolt and tighten completely.. This is the best performance as an eccentric throttle stop, as well as the location, the wide open throttle, or use to avoid wearing the carburetor parts.
7. carburetor throttle arm, linkage arm the link bar accordingly. This right is important to prevent connection errors. We link arms to fit one end of the link bar. Each application is slightly different at the end of the throttle arm will ask for the user to complete the beak.
No comments: