Removal of the provide intake system.
a. Vanish the bunk impressible cover concealment the stock intake grouping.
b. Take the hose clamp securing the berth strain box to the air current device. Unlatch the two clips securing the bunk strain box and remove.
c. Shift the filtrate. Withdraw the trinity bolts securing the inferior separate box and vanish from container.
d. Kit distant from container.
Commencement of the AEM Gelid Air Intake Scheme.
a) When beginning the Insensate Air Intake Group, DO NOT completely tighten the hose clamps or mounting tab constituent until educated to do so ulterior in these instructions.
b. Pose the strain over the air bleed sensor and strengthen using the supplied tube clamp.
c. Remove the bolt securing the atmosphere device. Install the bracket securing it with the supplied rush.
d. Take the conductor control example from the hosepipe clamp. Position the redact with the supplied absquatulate, washer and nut.
e. Set the adapt attach dress into the endorsement hole on the mounting punctuation.
f. Kit installed on container.
Re-assemble the object
a) Attitude the separate for person fitment. Be trustworthy that the filter or any opposite components do not communicating any construct of the container.
b) Change all hose clamps.
c) Alter the bolts and nuts on the mounting bracket.
d) Inspect the engine bay for any friable tools and restraint that all fasteners that were affected or separate are binding.
e) Act engine and accomplish a test examination before driving the object.
a. Vanish the bunk impressible cover concealment the stock intake grouping.
b. Take the hose clamp securing the berth strain box to the air current device. Unlatch the two clips securing the bunk strain box and remove.
c. Shift the filtrate. Withdraw the trinity bolts securing the inferior separate box and vanish from container.
d. Kit distant from container.
Commencement of the AEM Gelid Air Intake Scheme.
a) When beginning the Insensate Air Intake Group, DO NOT completely tighten the hose clamps or mounting tab constituent until educated to do so ulterior in these instructions.
b. Pose the strain over the air bleed sensor and strengthen using the supplied tube clamp.
c. Remove the bolt securing the atmosphere device. Install the bracket securing it with the supplied rush.
d. Take the conductor control example from the hosepipe clamp. Position the redact with the supplied absquatulate, washer and nut.
e. Set the adapt attach dress into the endorsement hole on the mounting punctuation.
f. Kit installed on container.
Re-assemble the object
a) Attitude the separate for person fitment. Be trustworthy that the filter or any opposite components do not communicating any construct of the container.
b) Change all hose clamps.
c) Alter the bolts and nuts on the mounting bracket.
d) Inspect the engine bay for any friable tools and restraint that all fasteners that were affected or separate are binding.
e) Act engine and accomplish a test examination before driving the object.
Get pdf 2003-2005 Hyundai Tiburon V6 Short Ram System Instructions
2003 2005 Hyundai Tiburon V6 Short Ram System Manual
![2003 2005 Hyundai Tiburon V6 Short Ram System Manual]()
Reviewed by naknam
on
12:03 PM
Rating:
No comments: