2004-05
1. turn off the ignition and the cars negative battery cable.
2. disconnect the electrical connections for air temperature sensor as shown in the illustration.
3. Unclip the battery cables as shown in the air intake duct.
4. loosen the air intake duct with two bolt to secure.
5. remove the air intake duct.
6. loosen the air inlet resonator to remove the four bolts securing the.
7. loosen the throttle body plenum, remove the two securing bolts.
8. hose clamp screw that secures the plenum throttle body as shown.
9 depressing. Chi, pair, and pull back is cam cover crankcase vent hose clamp.
10. like a throttle body plenum removed to pull firmly upwards.
Unclip the wire harness, such as resonance., 11 Using a flat blade.
12. Unclip the throttle cable and the cruise control cable (if applicable), and pull upward to remove the ball as shown in the following figure.
13. security of the throttle cable and the cruise control cable (if applicable) as shown on the clips in stock.
No comments: