1 2 3 4 5 6 7 8 8 9 9 9 9 10 10 11 11 11 plastic elements (b) clip celebrating according to CSN ISO PN cables attach 1 l left directional lights + Rear fog lights 2 3 31 land 4 (R) the right beam 5 58R round the right side parking lights 6 7 58 L 54 traffic lights left side parking lights installation instructions This rod is designed for Assembly in cars: Opel Corsa D, 3/5-door, produced from the year 2007, catalogue No. E50 and ready to tow a trailer with a maximum total weight of 1300 kg and 50 kg vertical load. From producer thank you for purchasing our product. In many testing confirmed their reliability. Reliability of boom also depends on correct Assembly and operation. For this reason we ask you to carefully read this statement and apply for the ToolTip. Rod must be installed
paragraphs describe the car manufacturer. 1 Assembly instruction. To ensure installings Rod should be disassembled and the metal bumper reinforcement, which would not meet again. 2. Insert the bracket boom (position 4 and 5) in the chassis members (holes (b) protruding threaded pins). Fix them loosely with the help of screws M10 x 40 mm (position 9). The pins rotate two nuts, remaining after its disassembly. 3. slide the main bar rod (POS. 1) between the brackets the boom (position 4 and 5) and corrected using bolts M12 x 35 mm (POS.. as shown in the illustration. 4. at points of sale (pos. A) sliding plastic elements that would go from the metal fittings of the bumper. 5. in step bumper, its axis, would cut a movie: width 50 mm, height 40 mm. 6. place the bumper. 7. Fix the tow ball (position 2) using bolt M12 × 75 mm (POS. 6) and M12 × 70 mm (position 7). With bolt M12 × 75 mm also correct socket plate (POS. 3). See figure. 8. tighten all bolts according to torque shown in the table. 9. connect the electric wire socket ... 7-poles
Download E50-Opel Corsa D angielska.pdf
No comments: