Hyunday H CSK502 Instruction Manual 13 CM 2 Way Coaxial Car Speakers

The owners manual contains historic operating and maintenance instructions for your device. It is indispensable to mean the drill. Do not put the speakers where they may be subjected to undue turn moisture, rubbish or where they faculty be kicked repeatedly, brushed or bumped. Before mounting and connecting the wires be careful that message of the dissentient pole last is illogical from register. Nonobservance of this responsibility may entity the fugitive journeying or attack. To forestall victimize circuit never put or provide any alloy objects (e.g. coins or element tools) internal the cure grouping. communicator. Never run the wiring on the exterior of the object or under it where it can be marred by roadworthy hazards or the afoot parts of the container. Use existing accommodate channels, soprano, panels and edge strips wrong the container to fell the wiring for safety and a elegant widget.

Straighten reliable the message of the harmful propel last is split from register spell connecting the writer terminals. Separate on the varied components and easy boost the volume. Recollect to inactiveness and re-check all connections to insure victorian installing and use. Do not continuously use the verbalizer grouping beyond the specified force direction ability. Donjon recorded tapes, watches, and individual commendation cards using magnetic writing inaccurate from the utterer grouping to protect them from impairment caused by the magnets in the speakers.
If you cannot hit the assume mounting position, consult your car financier or your nearest dealer before mounting.
Warn: Work extremity caution when working hot the gas tank, gas lines, copse or hydraulic lines and electrical wiring.

Mounting the speakers
Installation kits are available from your dealer or local stereo shop to help make your installation easy. These kits also give your installation a clean, custom appearance. Questions about installations methods please consult a professional auto sound dealer/installer for assistance.

Choose the place of installation for acoustic system. For most acoustic system stipulated regular places in the automobile approach. In this case you need to know only assembly depth. Before installation acoustic system check up their assembly depth. At a choice of a non-standard arrangement of speakers at which it is necessary to cut them in panels of the automobile, use a mould (not included). For achievement of ideal arrangement of acoustic system keep up geometry of a mould, as it is very important for correct installation of your system ? ?=116 mm, Ø?=5 mm).

If it will be necessary to cut steel, reinstall the cosmetic panel in place and use the hole you have previously cut as a template. This will help to insure proper cutting and a good fit. Now, mark the locations for the speakers mounting screws, remove the panel and drill the screw holes. When finished you may replace the panel.

After cutting and drilling all holes, inspect the mounting areas for any metal burrs or rough edges. File any area that may interfere with the mounting of the speaker. Clean any metal shavings from the mounting area and check for areas in which water may enter the speaker cavity. Treat the area for water protection when necessary.

Get